Lydia General Trading llc (Garami)

The stadium masts with fixed headframe for floodlights mounting are usually used for location where high concentration of luminaires is required over a small area.

Technical Specification:

1.Polygonal continuosly tapered cross section

2. Headframe at the top shaft will be tilted 10 degrees for floodlights aiming

3.Fixed platform and service ladder at the top of the shaft for maintenance purpose

4. Maintenance Cage lifts by hoist unit complete with safety brake to reach the fixed platform

5.Material: Q235B/A36/A283 M Gr.C / SS400/S235 JR / St 37-2 / Fe 360

Q345B/A572 M Gr. 50/S355 JR / ST 52-3/Fe 510

6.Finish: hot dip galvanization, blasting, powder coating, painting.

7.Galvanization standard: ASTMA 123 / EN ISO 1461

8.Welding: AWS D 1.1 / BS EN 1011-1, BS EN 1011-2

The number of floodlights is variable depending on the size of the area to be illuminated and intensity of the light, which is determined as a result of the Lighting calculation to be given by the customer with the pole length. Common features of these poles are that the most upper body of the where the floodlight is to be installed should be inclined to the Lighting direction with a certain angle, and there should be a frame system on which a working platform and floodlights are to be fixed. In addition, Mitaş Poles can provide technical support to the customers for the lighting calculation.

Stadium Lighting poles can be manufactured at any size, and or the manufacturing is carried out by joining more than one steel body of polygonal section up to 50 m height using the slip-joint method.

Eagle’s pole types, which are developed in accordance with customer requirements as well as our special designs, which are well-accepted throughout the world, are mainly as follows depending on the climbing system;

Stadium Lighting poles with caged ladders,
Stadium Lighting poles with internal ladders,
Stadium Lighting poles with man power lift.

The most important feature that distinguishes the poles from each other is the climbing system. In poles with caged ladder, there are safety steel bar rings which provide safety during climbing. In the internal ladder system, safety systems based on the customer’s requirements can be installed.